Cronus Zen Mouse and Keyboard: Detection and Mapping Setup
By JimmyCC · Published · Updated
Cronus Zen translates mouse and keyboard input into controller input. Native mouse and keyboard support instead sends those inputs directly to the game. See Cronus's explanation of native input and emulation.
Start by checking detection with scripts inactive, then configure your mappings. These steps cover the general mouse and keyboard setup; PS5 with Zen LINK needs separate wiring guidance.
Connect and check detection
Have a USB mouse, keyboard, controller, and computer running Zen Studio ready. Keep a second mouse and keyboard available for computer control, or use an MK switch: devices attached to the Zen become controller inputs.
Follow the official connection instructions:
- Cycle the right blue slot button until the Collective Minds logo appears. Scripts and GamePacks are now inactive.
- For the general setup, connect the controller to A1, keyboard to A2, mouse to A3, and PROG USB to the computer. Read the PS5 exception below before applying this arrangement there.
- In Zen Studio's Device tab, check Connected Devices. A question-mark icon means the model has no matching picture; it does not by itself indicate failure.
- Open Tools > Device Monitor. Mouse movement should change RX/RY; the documented WASD mapping changes LX/LY.
Configure and save mappings
The Zen Studio Live mouse and keyboard panel provides mapping and aim controls. Select HIP, ADS, or an AUX profile, then review the assigned keys and buttons.
Aim controls include sensitivity, the vertical-to-horizontal ratio, boost, smoothing, and deadzone adjustments. Cronus describes higher smoothing as steadier but slower to respond; increasing it is not automatically an improvement.
Use Finalize > Save to Device to write your configuration. Use Export to retain a separate .zmk copy. The Zen stores one .zmk file at a time; HIP, ADS, and AUX are profiles within that configuration.
PS5 connection requirements
Cronus's platform list lists PS5 with Zen LINK or the bypass method. Its PS5 documentation also identifies both routes.
The general mouse and keyboard arrangement above puts the controller in A1. The Zen LINK controller setup instead puts Zen LINK in A1 and a wired controller in A3. These instructions do not establish the combined Zen LINK, controller, mouse, and keyboard layout. Confirm that arrangement with Cronus support before changing connections.
The separate JimmyCC PS5 walkthrough covers the Zen LINK controller route. Use the official PS5 documentation linked above for current connection options.
FAQ
Why can I no longer control my computer with this mouse?
The mouse connected to Zen is being used as controller input. Switch it back to the computer or use your second set.
Does detection prove the whole setup works in my game?
No. The monitor checks establish that Zen reads the inputs. Console connection and game behavior still need separate checks.
Can I add a script after checking input?
Cronus documents script support for emulated input. That does not establish mouse-specific settings for a particular Jimmy CrakCrn script. Follow your authorized guide for its configuration, and use How to Load a GPC Script for file transfer. If behavior changes after activation, use the script troubleshooting checks.
Sources
- https://guide.cronuszen.com/mouse-and-keyboard/native-vs-emulation
- https://guide.cronuszen.com/mouse-and-keyboard/connect-and-configure
- https://guide.cronuszen.com/mouse-and-keyboard/supported-platforms-and-devices
- https://guide.cronuszen.com/zen-studio-live/mouse-and-keyboard-panel
- https://guide.cronuszen.com/supported-devices/ps5
- https://guide.cronus.support/zenlink-ps5-setup